
KAISER FOTOTECHNIK Kaiser RB 525 AS Lighting for Copylizer
- Na zalihama

KAISER FOTOTECHNIK Kaiser RB 525 AS Lighting for Copylizer
Trenutno najbolja ponuda:
2.332,40 €u Tia mobiteli
Slični proizvodi iz Studijska foto oprema
Opis i karakteristike
Kaiser Copylizer illumination unit RB 525 AS
LED incident light illumination unit with thermal management, consisting of two surface lights for even and soft illumination. Suitable for Copylizer exe.cutive LED (5215) and illuminated base plate exe.cutive LED (5244). Also suitable as incident light illumination for TopTable PRO (5921).
The efficiency of LEDs is much higher than that of conventional light sources. However, because LEDs also convert energy into heat, thermal management is required for optimum reproducibility, as otherwise both brightness and colour temperature would change as the temperature rises. The integrated thermal management ensures that the set brightness as well as the colour temperature always remain constant regardless of the room and unit temperature, thus achieving reproducible results. In addition, the LEDs thus achieve a longer service life. This thermal management includes both sensorcontrolled temperature monitoring with dynamic compensation control and sophisticated passive cooling via LED board and aluminium housing.
Each luminaire uses 192 specially selected white SMD LEDs, 5600 Kelvin, CRI 95. The light emitted is completely free of infrared and UV components, flickerfree and without residual ripple. Luminaires can be dimmed individually or synchronously in 1 % steps from 10 % to 100 %. Illuminated information display. The light intensity of the two LED panels is matched to each other. This results in exactly homogeneous illumination when the surface luminaires are aligned symmetrically. Memory function: The rehearsal lighting starts with the brightness that was set before the last switchoff.
Luminaire housing made of sturdy, anodised aluminium profile, swivelling, sliding and heightadjustable. Removable soft panes. Vertical support rods with height markings, swivelling in snapin joints. Fastening with stable joint bases. Including power supply unit.
Technical data:
Luminaires
- LED arrays: 2x 192 SMD LEDs
- Colour temperature: 5600 K
- Colour rendering index: CRI 95
- Beam angle of the LEDs: 100
- Illuminance (measured at highest possible homogeneity of illumination
of a DIN A3 original)
- with soft lens: 4600 lux
- without soft screen: 5200 lux
- Power consumption: 2x ≤ 28 W
- Operating voltage: 24 V
- Light emission area of one luminaire: 39 x 16.5 cm
- Vertical rods: Length 76 cm / Crosssection 20 x 20 mm
Power supply
- Input: 100240 V, 50/60 Hz
- Output: 24 V, 3 A
- Mains cable: approx. 2.50 m
Studijska foto oprema istog cjenovnog ranga
Novi proizvodi u kategoriji